How to set alarm on Edifice ECW-M300

Before using this guide, we recommend:

• Download official ECW-M300 Manual →
• Watch official 5117 ECW-M300 Manual Online →

All settings are clearly explained and understandable.

When an alarm is turned on, the alarm tone sounds when the alarm time is reached. One of the alarms is a snooze alarm, while the other four are daily alarms. You also can turn on an Hourly Time Signal that causes the watch to beep twice every hour on the hour.

• There are five alarm screens numbered AL1, AL2, AL3 and AL4 for the daily alarm, a snooze alarm screen indicated by SNZ. The Hourly Time Signal screen is indicated by SIG.
• All of the operations in this section are performed Alarm Mode, which you enter by pressing C.

To set an alarm time

1. In the Alarm Mode, use D to scroll through the alarm screens until the one whose time you want to set is displayed.

• To set a daily alarm, display an alarm screen AL1, AL2, AL3 and AL4 . To set the snooze alarm, display the screen.
• SIG is the hourly time signal setting.
• The snooze alarm repeats every five minutes.

2. After you select an alarm, hold down A for about three seconds until the hour setting of the alarm time starts to flash, which indicates the setting screen.

• This operation turns on the alarm automatically.

3. Press C to move the flashing between the hour and minute settings.
4. While a setting is flashing, use D (+) and B (–) to change it.
5. Press A to exit the setting screen.

Alarm Operation

The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the watch is in. In the case of the snooze alarm, the alarm operation is performed a total of seven times, every five minutes, until you turn the alarm off.

• Alarm and Hourly Time Signal operations are performed in accordance with the current time in your Home City, as kept in the Timekeeping Mode.
• To stop the alarm tone after it starts to sound, press any button.
• Performing any one of the following operations during a 5-minute interval between snooze alarms cancels the current snooze alarm operation.

To turn an alarm on and off

1. In the Alarm Mode, use D to select an alarm.
2. Press A to toggle it on and off.

• The current on/off status of an alarm ( AL1, AL2, AL3, AL4 or SNZ) is indicated by “ON” (ON) or “–” (OFF) on its Alarm Mode screen.
• In all modes, the alarm on indicator is shown for any alarm that is currently turned on.
• The alarm on indicator flashes while the alarm is sounding.
• The snooze alarm indicator flashes while the snooze alarm is sounding and during the 5-minute intervals between alarms.

To turn the Hourly Time Signal on and off

1. In the Alarm Mode, use D to select the Hourly Time Signal (SIG).
2. Press A to toggle it on and off.

• The Hourly Time Signal on indicator is shown on the display in all modes while this function is turned on.

Recent News about Casio Edifice ECW-M300 Series 

All Edifice ECW-M300 News →