How to set alarm on Edifice EQW-A1200

Before using this guide, we recommend:

• Download official EQW-A1200 Manual →
• Watch official 5325 EQW-A1200 Manual Online →

All settings are clearly explained and understandable.

Hands and Indicators

• 1 Hour Hand: Indicates the currently set alarm time hour.
• 2 Second Hand: Indicates the current alarm ON/OFF setting.
• 3 Minute Hand: Indicates the currently set alarm time minute.
• 4 Upper Dial Hand: Indicates the hour setting of the current alarm time in
• 5 Lower Dial Hand: Points to AL. 24-hour format.

To change the alarm time setting

1. In the Timekeeping Mode, press C four times to enter the Alarm Mode.

• The b Lower Dial hand will move to AL.

2. Pull out the crown to enter the alarm setting mode.

• If you do not perform any operation with the crown for about two minutes after pulling it out, crown operations will become disabled and the watch hands will no longer move when you rotate the crown. If this happens, push the crown back in and then pull it out again.
• You can toggle between the hour and minute setting mode, and the hour only setting mode by pressing C.

3. Rotate the crown to set the alarm time.

• The Hour Hand will also move.
• See “Using the Crown” for information about high-speed hand movement.

4. Press C to switch to the hour setting mode.

• The Hour Hand will move slightly left and right to indicate the Hour Hand setting mode.
• Check the 24-hour time indicated by the Upper Dial Hand to see if the current setting is a.m. or p.m.

5. Rotate the crown to adjust the hour setting only.

• See “Using the Crown” for information about high-speed hand movement.

6. After the setting is the way you want, push the crown back in to exit the alarm setting mode.

• The alarm always works based on the time kept in the Timekeeping Mode.
• The watch will return to the Timekeeping Mode automatically if you do not perform any operation in the Alarm Mode for about two or three minutes.

To turn the alarm on or off

In the Alarm Mode, press A to toggle the alarm between on and off. The x Second Hand will indicate the current ON/OFF setting.

Note

• The alarm will not sound if battery power is low.
• The alarm will not sound if the watch is in the Power Saving sleep state.

To stop the alarm

Press any button.

Recent News about Casio Edifice EQW-A1200 Series 

All Edifice EQW-A1200 News →