How to set alarm on G-Shock G-9300

Before using this guide, we recommend:

• Download official G-9300 Manual →
• Watch official 3261 G-9300 Manual Online →

All settings are clearly explained and understandable.

You can set four one-time alarms and one snooze alarm. When an alarm is turned on, the watch will beep for about 10 seconds each day when the time in the Timekeeping Mode reaches the preset alarm time. This is true even if the watch is not in the Timekeeping Mode. You can also turn on an Hourly Time Signal, which will cause the watch to beep twice every hour on the hour.

To enter the Alarm Mode

Use D to select the Alarm Mode (ALM) as shown on page E-22.

• About one second after ALM appears on the display, the display will change to show one of the following alarm screens: AL1 (Alarm 1) through AL4 (Alarm 4), SNZ (snooze alarm), or SIG (Hourly Time Signal).
• When you enter the Alarm Mode, the screen you were viewing when you last exited the mode appears first.

To set an alarm time

1. In the Alarm Mode, use E to scroll through the alarm screens until the one whose time you want to set is displayed.

2. Hold down A until the alarm time starts to flash. This is the setting screen.
3. Press D to move the flashing between the hour and minute settings.
4. While a setting is flashing, use E (+) and B (–) to change it.

• When setting the alarm time using the 12-hour format, take care to set the time correctly as a.m. (no indicator) or p.m. (P indicator).

5. Press A to exit the setting screen.

To test the alarm

In the Alarm Mode, hold down E to sound the alarm.

To turn an alarm and the Hourly Time Signal on and off

1. In the Alarm Mode, use E to select an alarm or the Hourly Time Signal.
2. When the alarm or the Hourly Time Signal you want is selected, press A to turn it on and off.

• The alarm on indicator and hourly time signal on indicator are displayed when the alarm and/or signal is turned on.
• The alarm on indicator and the Hourly Time Signal on indicator are shown on the display in all modes while these functions are turned on.
• If any alarm is on, the alarm on indicator is shown on the display in all modes.
• The alarm on indicator flashes while the alarm is sounding.
• The snooze alarm indicator (SNZ) flashes while the snooze alarm is sounding and during the 5-minute intervals between alarms.

To stop the alarm

Press any button.
Recent News about Casio G-Shock G-9300 Series 

• G-Shock G-9300 PROs & CONs from users and experts
• [G-Shock Old Alternative] DW-9800 started in 1999 and how’s it going now?
• [G-Shock Comparison] GW-9400 VS G-9300 VS GWF-1000

All G-Shock G-9300 News →