The Ultimate Guide to All G-SHOCKs โ composed by Experts
Before using this guide, we recommend:
All settings are clearly explained and understandable.
To enter the Alarm Mode
Use C to select the Alarm Mode.
To set an alarm time
1. Press D or B to display the setting (โ1 through โ5, or SIG) you want to change.
2. Hold down A until the hour digits of the current alarm time start to flash (about”two seconds). This is the setting mode.
- This also causes the alarm indicator to appear and turns on the alarm setting.
3. Press C to move the flashing between the hour and minute settings.
4. While a setting is flashing, use D (+) and B (โ) to change it.
- While the 12-hour format is selected for timekeeping, a P (PM) indicator will appear for times from noon to 11:59 p.m.
5. Press A to exit the setting mode.
To test the alarm
In the Alarm Mode, hold down D to sound the alarm.
To turn an alarm and the Hourly Time Signal on or off
1. In the Alarm Mode, use D or B to select an alarm or the Hourly Time Signal.
- Each press of D or B cycles between the alarm time screen and the hourly time signal setting screen.
2. Press A to toggle the displayed setting (alarm or hourly time signal) between on and off.
- This will cause the second hand to move to ON or OFF.
- An alarm on indicator will be on the display whenever any one of the five alarms is turned on. Turning on the hourly time signal causes its indicator to appear on the screen.
To stop the alarm
Press any button.
Being a fan of CASIO watches since 2009, I strive to share my passion and knowledge with others. Through publishing short notes and curating all listings on this site, I hope to inspire fellow enthusiasts to explore the world of high-quality CASIO watches. A proud owner of GST-B200, GG-1000, GA-110. Remember: Fake Watches are for Fake People.
Leave a Reply