How to set time on Edifice EFR-550 / Casio 5406

Before using this guide, we recommend:

• Download official EFR-550 Manual →
• Watch official 5406 EFR-550 Manual Online →

All settings are clearly explained and understandable.

1. Pull out the crown to the second click.

• Some of the hands will start to move. Wait until they stop.

2. Rotate the crown to set the 1 Hour Hand and 2 Minute Hand.

• Take care that you set the correct AM or PM time. Watch the day indicator when the hour hand passes 12 o’clock. If the day indicator changes, it means you just passed midnight.
• When setting the minute hand, move it four or five minutes past the desired setting, and then back it up.

3. Use B to change the day of the week.

4. Push the crown in and then pull it out to the fi rst click.

• Some of the hands will start to move. Wait until they stop.

5. Rotate the crown away from you to set the 7 Day Indicator.

• The day indicator setting uses a 31-day month. Make adjustments for months of shorter lengths.
• Avoid changing the day indicator setting between the hours of 10 p.m. and 1 a.m. Otherwise, the day indicator may not change correctly at midnight.

6. Use A to move the 3 Second Hand to the location (Home City) where you will normally use the watch.

• The 4 Small Hour Hand and 5 Small Minute Hand will also move along with the 3 Second Hand.

7. Use B to set the 4 Small Hour Hand and 5 Small Minute Hand to the same time as the 1 Hour Hand and 2 Minute Hand.

• If summer time is being applied to the 1 Hour Hand and 2 Minute Hand, set the 4 Small Hour Hand and 5 Small Minute Hand one hour later.
• Holding down B moves the hands at high speed.

8. Push the crown back in.

• This will start normal timekeeping.