How to set time on Edifice EQW-M600

Before using this guide, we recommend:

• Download official EQW-M600 Manual →
• Watch official 5193 EQW-M600 Manual Online →

All settings are clearly explained and understandable.

To change the current time setting manually

1. In the Timekeeping Mode, keep A depressed (for about five seconds) as the x Second Hand goes through the following sequence.

• Moves to YES (or Y for some models) or NO (N) to indicate the last signal reception result, then to READY (R), and then to the city code of the currently selected Home City.
• At this time, the v Left Dial Hand will indicate the Home City’s current daylight saving time setting (STDor DST).

2. Change the Home City and daylight saving time (DST)settings, if you want.

• For details about these settings, see steps 2 and 3 under “To confi gure Home City settings”.
• In the following steps, each press of C cycles between settings as shown below.

3. Press C.

• The watch will beep, and the x Second Hand and v Left Dial Hand will move to their 12 o’clock positions. This is the time setting mode.

4. Use D (+) and B (–) to change the time (hour and minute) setting.

• Each press of either button will move the hands (z Hour Hand and c Minute Hand) one minute.
• Holding down D or B will start high-speed z Hour Hand and c Minute Hand movement in the applicable direction. To stop high-speed hand movement, press any button.
• The  Lower Dial Hand and z Hour Hand move in sync with each other.
• When setting the time, make sure that the b Lower Dial Hand indicates the proper a.m./p.m. hour.
• If you want to change the date setting at this time, press C and perform the procedure starting from step 3 under “To change the current date setting manually” .

5. After the time setting is the way you want, press A to return to the Timekeeping Mode.

• This will cause the x Second Hand to move automatically to 12 o’clock and resume movement from there.

Recent News about Casio Edifice EQW-M600 Series 

All Edifice EQW-M600 News →