How to set time on ProTrek PRX-7000

Before using this guide, we recommend:

• Download official PRX-7000 Manual →
• Watch official 5242 PRX-7000 Manual Online →

All settings are clearly explained and understandable.

1. In the Timekeeping Mode, loosen the crown and then pull it out.

• This will cause the Second Hand to move to the city code of the currently selected Home City.

2. Change the Home City setting, if you want.

• To change the Home City setting, perform step 2 under “To configure Home City Settings”.

3. Hold down B for one second until the c Second Hand moves to A (a.m.) or P (p.m.)

• This is the time setting mode.
• In the following steps, each press of B cycles between settings as shown below.

4. Rotate the crown to adjust the time (hour and minute) setting.

• With the crown pulled out, rotate the crown more than once in the direction that you want to move the hands.
• When you release the crown, the hands will start to move at high speed.
• Note that high-speed reverse movement is not supported.
• When adjusting the setting, check to make sure that the c Second Hand correctly indicates an a.m. time or p.m. time.

5. Press B. This will enter the hour setting mode.
6. Rotate the crown to adjust the hour setting only.

• With the crown pulled out, rotate the crown more than once in the direction that you want to move the hands.
• When you release the crown, the hands will start to move at high speed.
• Note that high-speed reverse movement is not supported.
• When adjusting the setting, check to make sure that the c Second Hand correctly indicates an a.m. time or p.m. time.

7. After the setting is the way you want, push the crown back in and lock it.

• This causes timekeeping to resume with the c Second Hand starting from 12 o’clock.

Recent News about Casio ProTrek PRX-7000 Series 

All ProTrek PRX-7000 News →