How to set time on ProTrek SGW-600 / Casio 3451

Posted

in

,

The Ultimate Guide to All PROTREKs โ€” composed by Experts

Before using this guide, we recommend:

All settings are clearly explained and understandable.

1. In the Timekeeping Mode, hold down A for about two seconds until the time zone of the currently selected Home City starts to flash on the world map. This is the setting screen.

  • The Home City code will also appear on the display. Release A immediately after the Home City code appears. Keeping it depressed longer (about four seconds) will switch to the Local Time City setting screen, which is indicated when the Local Time City code is displayed.

2. Use D and B to scroll through city codes in the lower display until the one you want is displayed.

  • Make sure you select your Home City code before changing any other setting.
  • For full information on city codes, see the โ€œCity Code Tableโ€ at the back of this manual.

3. Press C to move the flashing in the sequence shown below to select the other settings.

  • After a city code is displayed, it will scroll once to show the full city name.
  • The following steps explain how to configure timekeeping settings only.

4. When the timekeeping setting you want to change is flashing, use D and/or B to change it as described below.

5. Press A to exit the setting screen.

 


by

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *